Pool Protector Alarm - Certified

This pool protector alarm comes with NF and CE Certificates.

More than 900 children between 1 and 14 die each year in drowning accidents. In California, drowning is the number one cause of accidental death for children 1-4 years of age.

But, do you really need these statistics to convince you to do everything you can to prevent this from happening to your child or grandchild?

The Pool Protector Alarm is an electronic monitoring system that automatically sounds an alarm when children or pets fall into your unsupervised pool. It's portable, self-contained and light weight. The unit is simple to operate. Entry into the pool will be detected by the Pool Alarm's electronic sensor, triggering a loud pulsating alarm at the unit and inside your house from the remote receiver.

The Pool Protector Alarm installation is very easy. It sits on the pool deck as shown above.

After you install this alarm, it can't be de-activated; it is always in the Alarm Ready mode until you put it in Sleep Mode.

If someone who does not know how to put the Pool Protector Alarm in Sleep mode and attempts to remove the alarm, it will sound an alarm.

The Pool Protector Alarm comes with a remote receiver which can be mounted in your home up to 200 feet from the main unit. It comes with a 12 volt power supply.

The Pool Alarm uses one a 9-volt battery (not included) which should last approximately one year.

There is a audible low battery indicator which will sound at the poolside alarm and the remote receiver.

Features:

100DB alarm

East to Install (5-10mins)

Sleep Mode with Magnetic Key

Works on 9 Volt Battery

Audible Low battery indicator

Automatic Reset

Detects intrusions of a one year old child weighing 6 Kg

A detection reacts and engages the alarm w/in 7 seconds

Automatic wake-up

Works with pools up to about 530 sq. ft - contact us if your pool is larger or has an irregular shape

Includes

POOLPROTECTOR Unit

Remote receiver

Transformer

Handle

Alarm Stabilized Pin (ASP)

Magnetic key

Operating Instructions Manual

Operate and Control Mode

Your alarm integrates intelligent system which analyzes the surface of the pool and can automatically reset. It works continually for all day 24 hours, only except when you activate the temporary sleep mode after using magnetic key to stop the system and the time you are in the pool, in sleep mode. After having installed your alarm, the system can’t be turned off, it is always active.

Magnetic Key Use

The protector is controlled with a magnetic key, used to stop the alarm for 100 seconds and transfer the alarm system to a temporary Sleep mode. Approach the key to the red round area at the up left of the panel, 2-3 beeps sound , indicating that the system goes into the temporary Sleep mode. Remarks: 1. When you remove the pool alarm from your pool, set it in Sleep mode with the magnetic key. 2. If you need more magnetic keys, please contact your distributor.

The alarm is easy to operate and has many function modes. It has Working mode, Temporary stop and Sleep mode and Reset function.

Working Mode:

When the pool unit is installed in the pool, press the reset button (white button on panel), your alarm will beep 2-3 times. Then after 3 seconds it will beep another 2-3 times, it indicates that your alarm is activated. No matter in which mode the alarm system stands, once you press the ”reset” button, your alarm will be quickly activated.

Temporary Stop and Sleep Mode:

Approach the magnet key to the red area on the panel, the alarm will beep 2-3 times, which indicates that your alarm is going into Sleep mode. Attention please, the alarm can be in Sleep mode only when it is in the Working mode and not beeping or in alarm. If the alarm is sounding, press the reset button then use magnet key to set it in Sleep mode.

Reset:

Your alarm reset button is located on the panel, it is the same button used for the Working Mode when you install it. When the unit leaves the factory, we set it for 10 minutes of alarm sound time, but if you just press the Reset button, it will stop the alarm sound and will continue supervising the pool.